The waist straps were edge stitched and topstitched in a similar manner to the
collar, sleeve cuffs, and leg cuffs (more on the latter two later); that is, they were edge stitched, and in addition to the edge stitching, there were three parallel, horizontal rows of topstitching ¼" apart.
 |
| STPCAA photo of Travis Mayweather screen-used ENT jumpsuit |
 |
| (publicity photo) |
 |
| (publicity photo) |
The fronts of the waist straps were folded under about 1" before being attached to the jumpsuit.
 |
| "Lynsioux" photo of screen-used ENT jumpsuit |
The waist straps were fastened to the jumpsuit by edge stitching again, but only on the front of the jumpsuit!
 |
| "Lynsioux" photo of screen-used ENT jumpsuit |
 |
| "Lynsioux" photo of screen-used ENT jumpsuit |
The waist straps were sewn down (vertically) at the sides and the backs left "floating."
 |
| "Lynsioux" photo of screen-used ENT jumpsuit |
 |
| "Lynsioux" photo of screen-used ENT jumpsuit |
The vertical fastening topstitches were near-impossible to discern on screen, although their effect was observable.
 |
| ENT, 2x9 "Singularity" |
 |
| ENT, 3x18 "Azati Prime" |
No comments:
Post a Comment